Anu | FPC Pressurized | Solar Water Heater (300 LPD ETC)
Product ID: D0261559749
ANU Solar 300 LPD FPC Pressurized Solar Water Heater is a flat plate collector based solar water heating system designed for pressurized hot water supply applications. This 300 LPD model uses a thermosyphon circulation system and is configured with 3 flat plate collectors and a horizontal storage tank. Verified listings describe the system as suitable for families of about 6 to 9 persons, with BIS and MNRE approval, PUF insulation, and a pressure handling capacity up to 8 bar. Brand information from the manufacturer states that its FPC systems use BIS approved and ISI marked panels, and that flat plate collector systems are intended for pressurized supply applications. The supplied reference images also match the 300 LPD FPC configuration with three collector panels and a horizontal ANU-branded tank. Installation-related requirements and optional accessories such as electrical backup are seller-dependent and therefore should be confirmed at purchase.
| Item form | Solar water heater |
| Country of origin | India |
Highlights
Attributes
| Product Code | AS-300FPC-3.3 |
| Capacity | 300 LPD/Liters |
| Type | Flat Plate Collector (FPC) |
| Pressure | Pressurized |
| Circulation Type | Thermosyphon |
| Number Of Panel | 3 Panels |
| Max Operating Pressure | 8 Bar |
| Maximum Water Hardness | 500 ppm |
| Minimum Height of Overhead Tank from roof | 2.5 meters |
| Outer Tank Material | Pre Coated GI(Galvanized Iron) |
| Tank Insulation | PUF-50 mm(Polyurethane Foam) |
| Product Certification | BIS, MNRE Approved |
| Warranty | 5 Year |
| Warranty (Tank) | 5 Years |
| Warranty (Panels) | 5 years |
| Inner Tank Thickness | 3.5 mm |
| Special Protection | Sacrifical Anode Rod for fighting water hardness |
| Electrical Backup Coil | Extra |
| Tank Volume | 300 LPD |
| Approx. Floor Area required (NS * EW) | 2.5m * 3.6m |
| Est. Carbon savings | Offsets 4.5 tonnes of CO2/yr |
| Est. Electricity savings | Elec. bill savings: 4500 units/yr |
| Tank orientation | Horizontal |
| Tank protection | Sacrificial anode (Manganese) |
| Electrical back-up heater | Optional (2KW, with thermostat control) at extra cost |
| Heat Exchanger | No |
| Expansion Tank Provided | No |
| Collector area (sq m) | 6.3 |
| Fins per Collector | 9 |
| Absorber material/coating | Copper fins, selective black chrome coating |
| Glazing | Toughened (textured) glass |
| System performance warranty (years) | 5 |
| Tank warranty (years) | 5 |
| Collector warranty (years) | 5 |
| Electrical heater (if provided) (years) | Depends upon the manufacturer |
| Warranty Inclusions/Exclusions | The warranty excludes consumables (sacrificial anode, hose pipe) and the glass panel for the collector |
| Warranty Type | On-site warranty by Manufacturer |
| Manufacturer Certification | ISO 9001 |